上海奔欣紙箱機械有限公司

聯系人：曹建林先生
聯系電話：86 - 021 - 57540641
手機：15800528058
電子信箱：alin424@163.com
所在地：上海奉賢區
公司地址：上海市奉賢區四團鎮彭平公路612號

產品型號：
產品規格：

原產地：

適用范圍：

詳細描述：APS II 電腦型水性印刷開槽模切機
APS II Computerized Flexo Printing Slotting Die Cutting Machine
送紙部：
v        采用德國進口伺服控制四軸式前緣送紙裝置（可選配后踢式送紙系統）；
v        電動離合、氣動聯鎖、移動警示、過載保護；
v        四軸式前緣送紙系統（延伸量可調整）、變頻調控風量，送紙精、穩；
v        同步升降式除塵裝置（可按需求調整風段），除塵更完善；
v        送紙膠輥采用快換式機構，維護方便；
v        送紙膠輥采用“雙膠層”，內軟、外硬，保護紙板強度。

Feeding Unit：
v        Lead feed system with four-shaft structure is controlled by servo, imported from Germany（Optional equipment— kick feeder）.
v        Machine unit open/close is motorized control with alarm, pneumatic inter lock, over load protection.
v        Lead feed system with four-shaft structure and frequency converter control suction to make feed accurately and stably.
v        Double feeding roller device can ensure the best stabilization in feeding.
v        Dusting device adopt synchronous-lifting structure（the wind section can dajust accordingly）to make dusting function be more perfect.
v        Quick change feeding roll device is convenient for maintenance.
v        Double layer rubber over the feeding roller（ its inside is soft and outside is hardness）to protect the strength of corrugated board.

印刷部：
v        印刷相位，電腦及電動數顯調整；
v        導送輪快速橫移機構，間隙自鎖調整裝置；
v        導送過橋板同步升降裝置，紙板導送更平穩；
v        網紋輥/膠輥氣動夾緊裝置，調控快捷，拭墨效果更佳；
v        卷軸鎖版，左、右兩側鎖緊裝置，掛板定位方便；
v        印刷自動復位系統，設控式節墨循環清潔系統。

Printing Unit：
v        Circumferential position is adjusted by both computer and motorized with digital display.
v        Quick lateral adjuster control guide wheel, Gap adjuster with self-locking function.
v        With the synchronous lifting device, the guide connectiong board transport corrugated board to even smoothly.
v        Pneumatic control to clop anilox roller and rubber roller, it can get good effect for testiong and adjusting.
v        Roll-locking device is easy to located the flexo-plates and lock it on both side.
v        Circumferential auto-reset, Controlled cycle washing system to save ink.

開槽部：
v        開槽尺寸電腦調控，自動對位、快速高效；
v        前、后刀分軸型式，尺寸調控受限小，連線模切生產更方便；
v        預壓輪表面包裹優力膠，不易損壞紙板；
v        快速橫移精密線性導向系統，位移快捷、精準，開槽光潔。
v        中刀位移機構，修邊截切裝置，生產適應性強；
v        修邊刀采用單刀刃、彈合式，修邊光潔、節約成本。

Slotting Unit：
v        Slotting dimension can be adjusted by both computer and motorized to raise production efficiency.
v        The front and rear slotting blade are set on two shafts, so it can get more slotting dimension range for adjusting. It also can easy to link rotary die cutter for the convenience of the production.
v        Pre-creasing tool covered with YOU LI rubber to prevents crushing board.
v        Precise linear guides system ensure slotting knife move pecisely and quickly, it can get good slotting effect.
v        Equipped with middle slotting knife lateral adjust device, trimming edge device to meet the needs of production requirement.
v        Spring sing edge blade is adopted for trimming corrugated board, it can save cost and get the good trimming effect.

模切部：
v        模切相位，電腦及電動數顯調控；
v        模切壓力間隙電動數顯調整；
v        膠墊輥自動位移機構，延長膠墊使用壽命；
v        進口快換式膠墊、調整方便、耐磨損；
v        精密型“設控式”速差補償系統，確保模切精度；
v        膠墊研磨修正機構，增加膠墊使用率，降低消耗。

Die Cutting Unit：
v        Circumferential positiong is adjusted by both computer and motorized with digital display.
v        Die cutting pressure gap is motorized adjusted with digital display.
v        Auto displacement control device to adjust anvil roll, it can prolong usage time of anvil roll.
v        Replaceable rubber anvil with good wear-ablity, it is easy to rplace operation.
v        Speed difference compensation system ensure die cutting precision.
v        Anvil roll repair device to convenient prolong usage time of anvil roll and reduce consumption.

技術參數 specifications：
APSⅡ參數Data 型號Model 1000*1800 1000*2500 1200*2500 1400*2800 1600*2800
最高運行速度 Max.speed (p/min) 200 200 200 180 160
最大紙板尺寸Max.size of board (mm) 1000*1850 1000*2550 1200*2550 1400*2850 1600*2850
最小紙板尺寸Min.size of board (mm) 260*400 260*400 300*420 330*450 380*450
隔張送紙 Skip feeding size (mm) 1150*1800 1150*2500 1350*2500 1550*2800 1750*2800
最大印刷面積 Max.printing size (mm) 1000*1800 1000*2500 1200*2500 1400*2500 1600*2800
標準印版厚度 Thickness of printing plate (mm) 7.2 7.2 7.2 7.2 7.2
最小開槽間距 Min. Slotting size (mm) 180*180*180*180 180*180*180*180 180*180*180*180 180*180*180*180 180*180*180*180

售后服務：

华北兄握租售有限公司

上海奔欣紙箱機械有限公司